Blog

Gear

Motorcycle Cover Buying and Sizing Guide

How to pick the right motorcycle cover by size, material and use case, plus what to check before you buy and how to make it last.

6 min read

A good motorcycle cover should fit your bike's actual dimensions, block UV and rain without trapping condensation, and have a way to secure it against wind. Get those three things right and a cover will protect paint, chrome and electronics for years. Get them wrong and you can end up with water stains, scratched fairings or a cover that ends up in your neighbor's yard.

Why a cover matters more than riders think

Sun is often worse for a motorcycle than rain. UV light fades plastics, degrades exposed seat coverings and cracks rubber on grips, boots and tires faster than most riders expect, especially on bikes stored outside or parked at work all day. A cover blocks that exposure and also keeps dust, bird droppings, tree sap and road grime off the paint and chrome, which means less time cleaning and less risk of the fine scratching that comes from wiping grit off a dirty surface.

Rain protection matters too, but it is only half the job. A cover that keeps water out but also traps humid air against the bike can be worse than no cover at all, because it creates the damp, still conditions that corrode exposed metal, fog up gauges and encourage mold on seats. That is why material and ventilation matter as much as waterproof ratings.

If you are dealing with rust on chrome, wheels or the chain itself, a cover helps prevent new damage but will not fix what is already there. For chain-specific corrosion, see our guide on how to clean rust off a motorcycle chain.

Choosing the right size and fit

Measuring your bike correctly

Covers are usually sold by length ranges and by bike style (naked, sportbike, cruiser, touring, adventure), but those categories are only a starting point. Measure your actual bike:

  • Length: front tip of the fender or fairing to the back of the tail section or saddlebags.
  • Height: ground to the top of the tallest fixed point, which is often a windscreen, top box or tall handlebar-mounted accessory.
  • Width at the widest point: usually the handlebars or mirrors, or saddlebags on a touring bike.

Write these three numbers down and compare them to the size chart on the cover's listing rather than trusting a generic "fits most sportbikes" label. A sport-touring bike with hard cases and a tall screen can need a cover sized closer to a full tourer than to a naked bike of similar engine size, so don't guess based on class alone. Confirm the exact size range against your own measurements and the product's chart before you buy.

Fit features that actually help

A few fit-related details separate a cover that stays put from one that ends up on the ground:

  • Elastic hem or drawstring at the bottom edge to cinch the cover under the bike.
  • Grommets or loops for a cable lock or bungee strap through the frame.
  • Windshield vents or a belly strap that passes under the bike to stop wind from getting underneath and lifting the whole cover like a sail.
  • Mirror pockets on some designs, which help the cover sit tighter around the front end.

A cover that is too large will flap in wind, rub against paint, and let rain blow in at the gaps. One that is too small will stretch the fabric, expose the wheels or tail, and wear out the seams faster.

Material types and what each one is good for

Material type Best for Trade-offs
Light nylon or polyester (single layer) Dust and indoor storage Protection varies by fabric weight, coating and UV treatment. Check the cover's outdoor rating.
Multi-layer woven fabric with coating Outdoor use, mixed weather Heavier, bulkier to store, usually pricier
PVC or vinyl Short-term, cheap rain protection Traps condensation, can crack in cold, poor breathability
Breathable laminated fabric Long-term outdoor storage Can shed rain while allowing some water vapor to escape. Check seam construction, vents and the maker's care guidance.

If your bike sits in a garage or shed, a lighter single-layer cover is usually enough since it only needs to stop dust and the occasional drip. For year-round outdoor parking, check the cover's stated UV resistance, rain protection and ventilation. A multi-layer cover is not necessarily breathable, so look for vents or a vapor-permeable construction rather than relying on the layer count.

Safety: be careful about covering a motorcycle that has just been ridden. A hot engine or exhaust system is a fire risk, and trapped heat can also warp plastics. Wait until the exhaust and other hot parts have cooled completely before fitting the cover. Check the cover maker's guidance on heat-resistant panels.

Features worth paying extra for

  • Reflective strips or a bright color if the bike is covered on the street at night, for visibility to traffic and pedestrians.
  • Antenna or mirror pass-throughs on bikes with GPS mounts or aftermarket mirrors, so you are not forcing fabric over fittings.
  • A soft inner lining at the tank and fairing areas, which reduces the chance of fine scratches from wind-driven rubbing.
  • A security loop sewn into the hem so you can run a cable lock through the frame and the cover together, adding a mild theft deterrent.

None of these are essential, but on a bike you store outside for months at a time they pay for themselves in reduced fading, fewer swirl marks, and one less thing to worry about overnight.

Covering a bike for storage versus daily parking

Daily-use covers get pulled on and off constantly, so prioritize ease of use: a single buckle or drawstring, lightweight fabric you can fold quickly, and a style that does not require two people to fit. Long-term storage covers, used when a bike sits for winter or sits unused for weeks, can be heavier and more involved to fit since they stay on for a long stretch. For that situation, pair the cover with proper fuel and battery prep. See our guides on fuel stabilizer for motorcycles and how long a motorcycle battery lasts if the bike will sit for more than a few weeks.

Safety: If you maintain the battery during storage, use a charger compatible with its battery type and follow the battery and charger instructions. Keep the charger uncovered and the charging area ventilated. Avoid shorting the terminals. A cover alone does not require battery disconnection.

If you are unsure which cover size or features actually suit your specific bike's dimensions and accessories, checking your model's details helps avoid an expensive return. For questions about your own bike, MotoDoc lets you choose the make, model and year, then ask by text or voice and attach a photo of a part or a warning light.

Caring for your cover so it lasts

Shake off loose dirt before folding a cover away, and wash it occasionally per the manufacturer's instructions, since trapped grit acts like sandpaper against paint the next time you use it. Store the cover somewhere dry when not on the bike, since a damp cover left balled up in a saddlebag can develop mold that transfers back onto the seat or tank later. Inspect the elastic hem and any grommets each season, since stretched elastic or a torn loop is usually the first sign a cover needs replacing before it fails during a storm.

Frequently asked questions

What size motorcycle cover do I need?

Measure your bike from the front tip of the fairing or fender to the back of the tail, and from the ground up over the tallest point like a windscreen or top box. Compare those numbers to the manufacturer's size chart rather than guessing from your bike's class, since a touring bike with a tall screen can need a bigger cover than its seat height suggests.

Is a cheap motorcycle cover worth buying?

A cheap cover is better than no cover for short-term dust protection in a garage, but thin, single-layer fabric tends to tear at the seams and let water through within a season or two outdoors. If your bike lives outside year-round, spending more on a layered, UV-stabilized cover usually costs less over time than replacing a budget one repeatedly.

Can I leave a motorcycle cover on in the rain?

Yes, as long as the cover is rated waterproof rather than just water-resistant, and as long as there's enough airflow to let moisture escape so condensation does not build up underneath. Check that the cover has vents or a breathable layer, and avoid covering a bike that is still warm from a ride.

Will a motorcycle cover scratch my paint?

A poor-quality cover with a rough inner lining or loose grit trapped under it can scratch paint, especially in windy conditions where the cover rubs against the tank and fairings. Look for a soft brushed lining, wash your bike before covering it, and choose a cover that fits snugly enough that it does not flap.

5 free questions a day

Start with a question about your bike.

Download MotoDoc — it's free to start.